TIPS ON EXACTLY HOW TO FIND YOUR MAIN SHUTOFF VALVES

Tips On Exactly How To Find Your Main Shutoff Valves

Tips On Exactly How To Find Your Main Shutoff Valves

Blog Article

Contact


The writer is making a few good annotation on How to Locate & Turn Off Main Water Shut-Off Valves overall in this great article just below.


How to Turn Off Water To House and Prevent Damage
One of the most common places a water main will be found in residence remains in your boiler room, cellar, or a cut out panel in a section for your home.
When you discover the water pipe you will just transform the shutoff clockwise to close all the water off in your house till you have actually finished the repair. Some homes will have a ball valve with a lever that you can pull rather than look to shut the water off.
If you try to shut the water off to your fixtures by using an angle stop and that doesn't work you will have to shut of the water main to make your repair work. There are also numerous other reasons you might need to shut the water main like fixing icy pipelines, fixing leakages, changing components or faucets.
Lots of people are not conscious that they even have a water main valve right in their very own residence and also simply call a plumber of never ever end up doing the repair work up until things get actually negative since they just do not know that shutting the water pipe is actually simple.

How to Find and Shut Off Main Water Shutoff Valve


Where is the main water shutoff valve located?


This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.


How to Turn Off Main Water Valve


Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.


If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.


Where are the isolation valves?


Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.


Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.



Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.



Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.

https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/


How to Turn Off Water To House and Prevent Damage

I came across that blog posting on How to Turn Off Water To House and Prevent Damage when doing a search on the internet. Enjoyed reading our write-up? Please share it. Help another person check it out. We enjoy reading our article about How to Turn Off Water To House and Prevent Damage.



Get A Free Quote

Report this page